Switch Information

15 kV, 600 A, Single Pole Switch

SWITCH
CONFIG.
BIL kV
(T:T-T:G)
VOLTAGE
RATING kV
CURRENT
RATING A
OPERATING
MECHANISM
TYPE
CONTROL
VOLTAGE
OUTLINE
DRAWING
 VES
SWITCH
ORDERING
NO.
1 POLE 150 15 600 SOLENOID 120 VAC 1000641 1000579G1

 

This solenoid operated two pole switch has two applications.  The first is to achieve 1000 amperes of current capacity at 15 kV by connecting the two modules in parallel with buss bars.  In this configuration it is used for arc furnace switching.  When the modules are connected in parallel, three separate switch mechanisms are required to make a three phase set.  This switch’s controls for arc furnace switching are shown starting here.  The second application is in conjunction with the transverse single pole switch shown below for switching capacitor banks at zero voltage.  The control required for this application is found here.  Repair parts are the same as for a 15 kV three pole switch and are found starting here.

Back to Catalog Index 


Translate »