Switch Information

15 kV, 600 A, Single Pole Switch

SWITCH
CONFIG.
BIL kV
(T:T-T:G)
VOLTAGE
RATING kV
CURRENT
RATING A
OPERATING
MECHANISM
TYPE
CONTROL
VOLTAGE
OUTLINE
DRAWING
 VES
SWITCH
ORDERING
NO.
1 POLE  T 150 15 600 SOLENOID 120 VAC 1003374 1001178G3
1 POLE  L 150 15 600 SOLENOID 120 VAC 1001182 1001178G1

 

These single pole switches are used for synchronous closing of capacitor banks to reduce in-rush currents.  It is available with two terminal pad orientations.  With the terminal pads perpendicular to the length of the switch it is used with the two pole 15 kV 600 A switch to switch capacitor banks at zero voltage.  The switch with the longitudinal terminal pads  is used in three phase sets to switch capacitor banks at zero voltage. T

These switches contains one form A (e.g. normal open) and one form B (e.g. normal closed) auxiliary contact. The required controls are shown starting here and here. The repair parts are the same as for the three pole 15 kV switch and are found beginning here.

Back to Catalog Index


Translate »